MotorcraftElement Asy - Air Cleaner (FA1908)

Fits perfectly.

Todo bien, funciona para ford focus 2016 se luxury, trae el mismo número de parte que el original. Es ligeramente más largo que el que tenia pero tomando en cuenta la pestaña y haciendo un poquito se palanca en la base del filtro queda perfecto. Además de que cuando lo compre estaba a un super precio

I've read some reviews in which people say they can't get the filter installed because of it being too long, incorrect size, etc. THAT IS NOT THE CASE. I have included a photo to show the new Motorcraft filter next to the original, factory Motorcraft filter. The other photos show where the singular tab goes into the housing, both before and after installation. As other reviewers have suggested, it does NOT require oil or banging on it to shorten it to get it to fit. In fact, DON'T do that. First, while making sure the singular tab on the back of the filter is facing DOWN, gently press the round opening into the engine side, then lower the back of the filter into the slot, as seen in the second photo. Make sure the singular tab is lined up with the slot. Then, just above the singular tab, press the filter IN toward the engine, as you lower it into the slot; see the photo of the tab in the slot. The two tangs in the filter housing will be OUTSIDE the filter, as seen in the center of the photo. Voila! The cover is ready to be lowered onto the filter housing for the final step of the installation. Don't over-tighten the 8 millimeter screws. Don't pay attention to those reviews that say it isn't the correct filter. It most definitely IS, you just have to follow the correct procedure to install it. It fits tightly for a reason; this prevents air from bypassing the filter as it's being sucked into the engine. I hope this helps! I'd hate to see people buy a lower-quality air filter because they think this Motorcraft filter won't fit. You can't beat OEM. There is serious value for the money here.

I’ve seen a lot of comments on the filter not fitting in the housing. I thought the same thing at first, but per Ford this is the correct filter part number for my 2017 Escape SE1.5L. Initially it seems about a 1/4 inch too long but just squish/compress the filter a bit by hand and it fits properly.

Aunque la caja este abierta, el producto es el original y NUEVO. Funciona bastante bien.

Perfect for the job. Slightly tricky to install as it is slightly long out of the box. Just give it a little twist to give a slight swirl to the filter. Then once it's on push and twist to allow it to snap inside the housing. The factory one I replaced also has a slight twist to the filter so apparently they make them long to give them a tight fit.