🔩 Unlock Your Engine's Potential with Precision Tools!
The Heavy Duty 2801 Flywheel Holder Flex Plate Lock Tool and 7676 Oil Seal Repair Kit is designed for BMW N20 and N26 engines, ensuring perfect fitment and ease of use for timing chain replacements and oil seal repairs. This comprehensive toolset includes everything you need for efficient engine maintenance, backed by a 30-day satisfaction guarantee.
| Manufacturer | Bonbo |
| Brand | Bonbo |
| Item Weight | 2.22 pounds |
| Package Dimensions | 7.17 x 3.03 x 2.44 inches |
| Manufacturer Part Number | B-7601 |
L**F
N55 Oil pumps
Works on N55 oil pumps when it’s time to angle torque the sprocket to the oil pump. 1 pin lines up to the sprocket, the other pin in between the teeth. Hold with one hand, torque with the other. Works great!
R**R
Did not fit
This product has to be modified for the locator pins to fit in. The pins were not straight and had to be hammered to work properly. Do not buy this. Buy a better one, we were in a pinch and couldn't wait for a new one
B**N
Oil pump lock tool doesn’t fit correctly
Tool does not fit into the oil pump sprocket.Pins are not spaced correctly
B**E
little tweeking required
The pins that hold the oil drive gear are about worthless..CAUTION.....you can break your tensioner and guide assembly on lower gear set if this tool breaks while using it (i DID use the shaft lock) ).......so after breaking mine....i drilled the pins to 7mm installed hardened bolts w locktite cut heads off...and it now functions best.....but it costed me the above lesson...take my advise,( I didnt have untill AFTER)
R**.
Doesn’t work.. won’t fit get a quality tool
Didn’t work.. I should’ve known got the motor tore down then find out the tools don’t work. I have found as usual don’t bug anything for your German car on Amazon unless you want to make it work or replace the parts 10 times. Cheap garbage is all you can get on here. Go to ecstuning or Fcpeuro as nothing on here is good.
J**R
Prongs do not fit
As mentioned in previous reviews, the oil pump alignment tool does not fit at all. The prongs are completely off center and does not fit.
R**.
Works, but only after modification
The flywheel holder worked as described. I used a few zip ties to keep it from falling out. The oil pump tool however, was an absolute nightmare to an already difficult job. The "prongs" that are supposed to fit into the holes on oil pump gear were way off. The 2 prongs we're bent way out of alignment and I had to carefully pound the shlt out of it to make them line up. It wasn't fun trying to make it all work but it eventually did
J**E
The Pins in the oil pump drive shaft holder do not fit.
The flywheel holder was perfect. I attached the oil pump drive lock and the pins did not line up with the holes in the drive gear. They were too close together. I thought I might be done for the day but I filed some metal off of the inside of the pins to get them to fit and finish my timing chain replacement.
Trustpilot
1 day ago
3 weeks ago